У меня только u-boot:
U-Boot 1.1.4 (WNR612 400 MHz, V0.4, Sep 15 2011 - 01:49:23)
DRAM:
sri
#### TAP VALUE 1 = a, 2 = b
32 MB
Top of RAM usable for U-Boot at: 82000000
Reserving 269k for U-Boot at: 81fbc000
Reserving 192k for malloc() at: 81f8c000
Reserving 44 Bytes for Board Info at: 81f8bfd4
Reserving 36 Bytes for Global Data at: 81f8bfb0
Reserving 128k for boot params() at: 81f6bfb0
Stack Pointer at: 81f6bf98
Now running in RAM - U-Boot at: 81fbc000
id read 0x100000ff
flash size 4194304, sector count = 64
Flash: 4 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot: 0
Trying eth1
dup 1 speed 1000
Client starts...[Listening] for ADVERTISE...T▒▒
Забыл линка:
uboot.bin
