Hi guys

I have this laptop that does not turn on after changing charger it did not turn on anymore, make the measurements to the voltage manager and the only measurements that he threw me are the ones that I attach in the photograph
I imagine that they must be some of those resistances but I do not know what value they will be
waiting for your help
Thanks

hey!
1. Why you change charger? maybe bad soldering?
2. Please write the model of IC.

Hi,

1. change of charger since the dog ate the cable
2. The IC is bq24780S, in the point of entry VCC get 19.2V

---

Posted after 2 hours 51 minute 35 seconds:
In the mosfet the voltage input M3056M have 19.3V of entry but at the exit its value is 0 volt

bad dog! :D

1. How many resistance between 1 and 2 lamel, and between ground and 1 lamel? (ACN/ACP)
It seems that you have short circuit at AC_BAT_SYS

There is a boardview for this motherboard, free in internet. use it. Check resistance at AC_BAT_SYS first.

Solved,

I found a scheme and I found the the responsible ic was pq8902
please administrator close and thanks for the help

You can close theme by yourself, click on green symbol at up-right angle of your "solved" message.
AND READ TERMS OF USE, it was written in it.