Hello
I can not find the bios dump (4 mb) for Asus K53SV, mainboard K53SV rev.3.1
Thank you very much for the help

Thank you so much, I can not enter this site
thanks

see mail

Thank you
Thank you very much

The bios file is not good, does not work,
Laptop is Asus K53S
Motherboard is K53SV rev.3.1
Should be for another model, the network card fails to install and does not work

thanks

Do you think that all problems are solved by flashing BIOS?

If you write a F1 bios then you need to write MAC by BT and LAN will be work. BIOS for this model 100%
BT_BT2

The bios version is BIOS 320 by Asus
http://support.asus.com/download.aspx?S ... kgfqmrdCMD


Instead the version of the file from your bios is 324 (from asus does not exist)

Thank you

On ASUS web site only a BIOS region (UPDATE) and not a full BIOS dump. If you will write from site -notebook will turn into a brick.
324 version exist. But not for the end user and for service.

The BT file, do not work. I installed windows 7 64-bit.
Attached error, does not work and does not find the network card
Thanks

oh... Read carefully what's written above.

BT need to be launched only from DOS.

Как изменить МАС-адрес ИЗ под DOS

Например, мы хотим изменить Mac адрес на этот 92-E5-BA-F9-AD-C4
пишем команды (где последние два символа команды есть MAC-адрес, который повторяется два раза)
bt.exe найдете в этом архиве "ASUS_BIOS Tools 2.0"
После каждой команды нажмите Enter.

bt.exe -C CNFG /W C2 92
bt.exe -C CNFG /W C3 E5
bt.exe -C CNFG /W C4 BA
bt.exe -C CNFG /W C5 F9
bt.exe -C CNFG /W C6 AD
bt.exe -C CNFG /W C7 C4

bt.exe -C CNFG /W D7 92
bt.exe -C CNFG /W D8 E5
bt.exe -C CNFG /W D9 BA
bt.exe -C CNFG /W DA F9
bt.exe -C CNFG /W DB AD
bt.exe -C CNFG /W DC C4

и все.

How to change the MAC address from DOS

For example, we want to change the Mac address of this 92-E5-BA-F9-AD-C4
write commands (where the last two characters of the command have MAC-address, which is repeated twice)
bt.exe found in the archive "ASUS_BIOS Tools 2.0"
After each command, press Enter.

It works. I followed your instructions and it works.
Thank you very much.

Best Regards