Hi guys,

I replaced the CPU on this one - was shorted before and now I get 7 beeps.

The FAN starts, the LED is on but no CPU power. CPU resistance at 3ohms. I lifted PL701 to inject 1V but maximum current drain is 1.75A without anything getting hot.

I re-flashed ALL BIOSes including KB9012 but same result. Vron is present at ISL95833 at 3.3V.

There is not discrete VGA, only a Pentium CPU (SR0VQ) and SLJ8E.

Could it be the SLJ8E?

Thank you in advance!

br,
george

Flash the BIOS first...

I have flashed BIOSes and IO firmware..

I think the processor is probably not properly soldered...

May be POST-card show your problem?

I will try to resolder the CPU ...also Lex66, I have a POST-card but I never used it yet - I must understand how first. It arrived only last week from supplier.

With post-card you will see post-code of error, and it can help...