Motherboard asrock h61m-hvs rev 1.00
Strange problem when I turn on motherboard without processor all voltage is ok I mean Vtt Vcore vdd vtt ram etc but when I replace processor i only dont have voltage phase for cpu , i have done new bios dump ,procesor is intel g620 2.6 supported for this motherboard ,processor for sure work i check it ..Maybe some one have similar problem ?Please give me some instruction ..
You can answer in russian I can read it ,no problem ..
PS i have also board view and all voltage what coming from pwm controler are ok ..But no phase cpu..

Can some one hellp me?

когда вставлен процессор есть ли напряжение vtt_cpu и сигнал vcore_en?
проверьте исправность двух резисторов 2,2 ома возле четвертой фазы процессора.

There is no phase 4 only as see phase 1 ,phase 2,phase 3 and phase 5..Can you tell me where is fourth phase?

если материнская плата нормально работает, проверьте наличие 4 фазы после загрузки windows и запустите любой тест процессора. скорее всего она появляется при нагрузке.

Does not swich on that all i mean no picture

did you try to change cpu? I had similiar problem with h61 after heating hm61 and changing another 1155p cpu it worked. maybe u have same problem like me. first try to change cpu and if it won't work, try to heat h61 chipset and try again. write results please. ty.

i found out i have change all capacitors around CPU and motherboard wake up but i have some short around memory slot I thing some driver is in short but tomorrow i will see ,this want be problem ..First is check capacitors and then everything else ..Thanks every one fo help..You are best ..Regard from Serbia..