add DVI to non DVI reference 1080TI

hashwood

hello, is it possible to add DVI connector to non DVI 1080TI,

Add the connector and populate the missing parts.

Anyone did this ?

nemos

it's possible but much easier to use DP to DVI converter

hashwood

thanks. I tried to use active DP-DVI adapter, but it works at max 70hz at QHD resolution. It's not that hard to solder a connector from a damaged board...

nemos

it's not so hard but useless. DVI output limitations for most of videocards is QHD - 70Hz or WQHD - 60Hz. So don't spend your time, you'll not get more

hashwood

who told you that ?
I used QHD 110hz on dual Dvi on nvidia 770TI, Nvidia 1080, Nvidia 1080TI

hashwood

for any crazy guy like me who still use DVI:

be careful that except adding parts that are near video out connectors

you also need to add a 1k resistor that's under GPU chip.

Posted after 2 hours 36 minutes 29 seconds:
anyone knows what's the fan controller chip on reference 1080TI ? Fans are not spinning.

aleksros

Fan controller it's GPU. If fan not spinning - check 12v and pwm pulse from gpu.

hashwood

thanks, and it must be a mosfet ?

add DVI to non DVI reference 1080TI

Кто сейчас на конференции