Hello there, i have a Gigabyte gtx970, no Video out. When i test it as secondary card with Mods, i get this weird message. It loops itself until i abort it. All voltage present, bioses already reflashed with spi flasher

Have anyone Informations about this issue?

Версия какая?

Gigabyte Gaming G1 GTX970

Имелось ввиду версия MATS MODS.

i have testet with two versions: v.367.38.1 and v.400.184
as secondary card with initializion parameter "./mods gputest.js -skip_rm_state_init -mfg"
and testing with "./mats -n 1 -e 20"

Assassin
Use Shift+PageUp to see the result.

I know how to use mats/Mods ;)
There is no results, becaus the error message loops endless until i stoped it with STRG + C
Unsupported numbers of Slices 11
Unsupported numbers of slices
Decode Adress: unsupported DRAM Page Size - 32!
Invalid number of L2 Slices 11
Unsupported numbers of Slices 11
Unsupported numbers of slices
Decode Adress: unsupported DRAM Page Size - 32!
Invalid number of L2 Slices 11
Unsupported numbers of Slices 11
Unsupported numbers of slices
Decode Adress: unsupported DRAM Page Size - 32!
Invalid number of L2 Slices 11
...

Thats the point - i dont get any results, also no report.txt File:(

It seems no

To see how the test ended, you can simply climb higher using the key combination Shift+PageUp
report.txt report.txt is created at the ./ of the disk partition
execute
cd /
bin home root report.txt

The test never ends, it runs endless, over hours. Ubtil i stopped it manualy

Assassin
can you shoot a video? it would be clearer

https://youtu.be/6CnOODXuPtA

At the end - i Interrupt/abort this with STRG+C, becaus when i dont Interrupt this, the report.txt fets filled completly ubtil the usb Stick have 0kb FREE of memory (and the report File is then 8GB big, but without any results, only this Looping message)

Assassin
0:28
Press Shift and PageUp and move to the beginning of the test.
there should be a table by memory channels
Probably the culprit of the GPU

была таже проблема матс от викона решила задачу

in video, on 0:28 i have pressed CTRL + C to abort this looping message



i test it now with older 367 version with gold files...but how can i run mods on secondary GPU? becaus this GTX have no video out, so i use an old AMD card as primary card for video out, and the GTX970 is placed on a second PCIe x16 slot (x58 board)
i knows this command, but it shows me - hardware was not initialized

./mods gputest.js -oqa -old_gold -test 94 -fan_speed 70 -dramclk_percent 100 -ignore_fatal_errors -run_on_error -matsinfo


what commands should i use to say mods to use the second card?

Assassin
here:
viewtopic.php?p=786243#p786243
although the built-in video core of the processor is used
and read the topic below

Mensch ich habe oben link für mats gelassen. Mach mit Rufus neu usb mit mats. Danach muss du Gold file in mats Ordnern kopieren. Im Bios von usb Start einstellen. Video Signal von defekte Karte. Egal ob die Karte liefert Bild oder nicht. Pc starten ca. 5 Minuten warten. Die Grafikkarte wird automatisch getestet. Pc ausschalten. Danach findest du Report.TXT file mit Test in usb. Sorry für Fehler
Ich habe gleiche Problem mit gtx960 gehabt.

Предлагаю воспользоваться этой версией.

@Lechnowitsch
wont work. report.txt file gets large and fill up usb stick completly :(

version 343 also wont work, same errors
Posted after 5 minutes 18 seconds:
can it be possible thtat gpu itself is damaged?

einfach alle 4 ram austauschen

4? It have 8 ^^
But i dont think its a memory issue... This L2 slice error confuses me, so i think, its an gpu damage

reball it

I have reflowed it with flux and push it a little, but error still exist

Assassin
Only hard rock, only reball

unsupported dram Page size GTX 980 Ti

This card was baked in an oven by its previous owner... So its realy possible that is a gpu defekt i think.
A GTX 970 is not worth the effort of reballing

Может поможет кому.
Была сейчас точно такая же ситуация с ASUS GTX 950. Матс говорил про не инициализированную карту. Только 400.250 матс сказал, что vbios плохой. Проверил обвязку и обнаружил наполовину сбитый резистор на первой ножке микросхемы BIOS, поправил и всё заработало.