MODS start: Wed Feb 9 10:11:57 2022

Command Line : gputest.js -mfg -old_gold -testforce 178 -skip 171 -skip 293 -fan_speed 70 -dramclk_percent 100

CPU
Foundry : GenuineIntel
Name : Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
Family : 6
Model : 7
Stepping : 6

Version
MODS : 367.106
OperatingSystem: Linux (x86_64)
Kernel : 4.1.2-gentoo
KernelDriver : 3.63
HostName : tinylinux
Sys-uuid : 00000000-0000-0000-0000-1C6F653DE6B1

GPU 0 [01:00.0] dev.sub 0.0
---------------------------
PCI Location : 0x00, 0x01, 0x00, 0x00
DID : 0x1c81
Raw ECID : 0x0000000004e313800000005cb8c80dc4
Raw ECID (GHS) : 0x00000004705cb8c80c0000000e1889c0
ECID : SNBZ83-14_x49_y39
Device Id : GP107
Revision : a1
NV Base : 0xfb000000
FB Base : 0xb0000000
IRQ : 16
NV_PMC_INTR_0 bit 30 high.
Trying to clear interrupt by writing 0x2 to register 0x12004c
Successfully cleared GPU's interrupt state.
Error 000000000229 : Gpu.Initialize hardware was not initialized
Error 000000000229 : Global.PrintGpuInitError hardware was not initialized
Error 000000000229 : Global.InitializeGpuTests hardware was not initialized
ERROR: Unable to determine current VGA mode, ax=0x4f03
ERROR: Unable to set VESA mode 0x3, ax=0x4f02
Error 000000000237 : Global.EnableUserInterface unable to set mode
RmDestroyGpu failed

Error Code = 000000000229 (hardware was not initialized)


####### #### ######## ###
####### ###### ######## ###
## ## ## ## ###
## ## ## ## ###
####### ######## ## ###
####### ######## ## ###
## ## ## ## ###
## ## ## ######## ########
## ## ## ######## ########


MODS end : Wed Feb 9 10:12:00 2022 [3.379 seconds (00:00:03.379 h:m:s)]