I need bios dump for Dell Optiplex 3040 SFF
Motherboard : 5XGC8-A
Secket: LGA 1151
Service tag: B9XR052
I can not find product on Dell site by this original service tag. My motherboard is red colour. Please help.

What's happened with your's ?
uppload it here.

For your system from site

I flash bios from site, but something was wrong, and after that computer start, but black screen is on monitor. I provide here my dump, if you can, helpm me please. Regards.

Check this

Thanks, but not working.

viktor-novikov51
У вас BG с 5 политикой, оно нигде не заработает, вот зачем такое высылать? Идите ка почитайте в методики и технологии! )))

and never will be.

Your Dell has BootGuard enrolled, and this makes all complicated

Can you write your CPU and PCH (chipset) - i5-6400 /H110 as an example.

Processsor is Intel Confidental QHQG 2.2 L452C607/Chipset is H59457

Было взято с битого дампа. Бекап Fit не открыл.

viktor-novikov51
Дамп ТС битый, да.

А вот ваш файл вы из чего собрали/ выдрали, слили? А то я не понял.
Регион по размеру как у тс, но версия и ключи BG не совпадают - так что предполагаю, что не его регион.


If MB doesn't work - how this screens were made? Why CPU is ES - it is not an origina.
PCH - HM170? Can you make a photo of PCH?

I was flash bios from Dell site, by the model Dell Optiplex 3040, and I read SPI after that.

Из апдейта, и какой-то дамп отсюда, в uefitool посмотрел ключ одинаковый. А вот что инженерник там, так ТС после озвучил, посмотрел бы внимательнее.

try this.

bogivetAnd after you flash new bios - CLR_CMOS!!! Only ather that you can short power button.
Also check that CPU Vcore is up aftep power on.

I have some variants, which you could try, if bios doesn't work

I do that, vCore is ok, but no picture with dump. I have dump which working, I do it by myself. But I have problem, and I write to Victor about that. Windows booting, but graphic card can not install, and Processor is display in windows as Intel Genuine 0000, and I have not Gigabite LAN as device.

It's OK

Take a photo of LAN chip and stikers on mb


you have an Engineering sample CPU, officialy it doesn't exist. It has various bugs. It is NOT a consumer's product. Your chipset also ES, not a finish H110. Where did get it - the big question )))

Насколько я понял картинка есть на битом дампе в котором ТС заменил в редакторе дескриптор регион. С остальными дампами от не старта, до не полной инициализации. В флешке- OTP содержит кусок дескриптор региона, возможно беда с программатором.

Pictures of LAN and Motherboard sticker.

1)What was a problem when it came to you?
2)For what purpose did you decide to update BIOS
3)
What and how you did?
4)
First of all - check VDD, CLK on 8111H lan chip
5)
What GPU - dicsret (PCI-E x16) or int (CPU)
what is vid/pid? What does installer say? Where are drivers from? What is OS?

Can you download this and run MEinfo, MEManuf in system and post screen here?


У него, понятное дело, проинициализировался и NVAR, и в том числе есть 109 отличий в ME регионе. В любом случае FIT не может открыть этот инженерный ME, ручками что ли его расковырять...
LAN имеет OTP и MAC скорее там.

MeInfo from dump which working.

bogivet it is not ME info. ME Analyzer is different software.
Answer the points. (1-5)

I get this error when start MeInf.

bogivet
Why do you stubbornly ignore my messages and get out of context what is convenient for you?
I asked for a clear answer on points
1)What was a problem when it came to you?
2)For what purpose did you decide to update BIOS
3)First of all - check VDD, CLK on 8111H lan chip
4)What GPU - dicsret (PCI-E x16) or int (CPU)
what is vid/pid? What does installer say? Where are drivers from? What is OS?

5)Can you download this and run MEinfo, MEManuf in system and post screen here?

I cannot help you until you answer the questions.